The
meter is used to measure the relative strength of the incoming
signal.Use the volume control to set the meter in the center of the
scale.
Use the changes in upward meter movement while receiving your
transmitters pulsed signals to help get good directional information
from
your antenna position.The meter is also used to measure battery condition
when the ON-OFF-BATTERY TEST switch is in BATTERY TEST.The
battery indication box on the bottom of the meter scale will indicate
the
battery voltage remaining in the battery.A 6 on the meter is 6 volts
remaining (almost totally discharged battery),a 9 on the meter indicates
9
volts remaining (a good battery).Replace the battery when the needle
falls
into the bottom of the battery indication box.